 |
 |
 |
|
For an exciting addition to your dash, Kenwood's KDC-4022 CD receiver features a large, multicolor dot matrix display on a fold-down face. You'll be rockin' the night away when you turn up Kenwood's 22-watts RMS power supply. Front and rear preamp outputs give you the ability to add more juice with external amps. The rear preamp outputs are switchable to subwoofer mode with a low-pass-only filter.
Shape the sound contour with the six preset tone curves of System Q Sound Control. Source tone memory lets you set different System Q settings for each source (AM, FM, CD) — handy if you're always breaking away from a CD to catch radio news or talk programs. Select one of the three Mobile Preset settings to optimize the System Q curves for the speakers in your car.
You also get CD changer controls, which can be converted to an auxiliary input with an optional adapter. Add the Kenwood SIRIUS tuner and listen to SIRIUS Satellite Radio's 100 streams of music, news, sports, and entertainment. Dual zone audio control lets you play a CD changer, Sirius radio, or other auxiliary source in the back seat, while playing a CD or the tuner from the receiver up front.
|
|
|
|
|
|
 |
|
 |
|
Features
- Integrated Quad 1-bit D/A Converters: The KDC-4022 is equipped with four Digital-to-Analog converters, two for each channel, which improve playback sound quality, musical detail and resolution. Using two D/A converters for each channel cuts distortion by half.
- System Q Sound Control: Six EQ curves are preset into memory, allowing you to recall the best preset EQ curve for different types of music. The preset curves are named "Flat", "Rock", "Pops", "Easy", "Top 40", and "Jazz". In addition, you may store your own settings under the "User Memory" EQ curve. Each preset has its own bass, middle, and treble level settings.
- Speaker Settings: The Speaker Setting function tailors the System Q Sound Control settings according to the type of speakers in your vehicle. You may select a Speaker Setting of "SP OFF" (flat), "SP O.E.M." (for OEM factory speaker systems), "SP 6*9/6" (for systems with 6" and 6"x9" speakers), or "SP 5/4inch" (for systems with 4" and 5" speakers).
- High Pass Filter: The KDC-4022 has an adjustable 12dB/octave high-pass filter for the front and rear channels. You can choose the cutoff frequency from 100Hz, 125Hz, 170Hz or Thru (no filter). Note: The high pass filter only affects the rear preamp outputs when they are switched to "rear", not "non-fading".
- Switchable Rear/Non-Fading Preamp Outputs: You can switch the rear preamp output to a non-fading output for use with subwoofer amps. Once in the non-fading mode, you can adjust the level of that output from -15 to +15 in 2dB steps. In addition, you can choose the cutoff frequency of the NF output's 12dB/octave low-pass filter from 50Hz, 80Hz, 120Hz or Thru (no filter).
- Sirius Satellite Radio Controls: This unit can control the optional Kenwood Sirius Satellite tuner (item #113SR901). In addition to the Sirius tuner, you will need an antenna and subscription in order to receive Sirius Satellite Radio programming. The Kenwood Sirius radio tuner has a CD-changer pass-through, allowing the connection of an optional Kenwood CD changer in addition to the Sirius tuner with only one connection to the head unit.
- Auxiliary Input "Ready": When used with an optional adapter, this unit can accept input from an auxiliary source. When the CA-C1AUX adapter (item 113CAC1AX) is used, you cannot connect a CD changer to the head unit because the adapter plugs into the DIN changer control connection on the head unit. When the KCA-S210A 2-changer switch (item 113KCAS210) is used, you can connect a CD changer and an auxiliary audio source at the same time. When an auxiliary audio source is connected, you can choose from one of six names for the source: Aux 1, TV, Video, Game, Portable or DVD.
- Dual Zone Audio Control: When an external audio source is connected (CD changer, Sirius Radio, or Auxiliary Input source), the KDC-4022, with its Dual Zone Audio Control, allows you to play the external audio source in one zone, while at the same time play an internal audio source (CD or tuner) in another zone. When Zone 2 is switched on, the output of the front channels becomes different than the rear channel output. You can choose whether you want the external audio source to play through the front channels (sending the internal source to the rear channels), or through the rear channels (sending the internal source to the front channels). When operating in Dual Zone mode, audio adjustments can only be made to the internal source. Note: If the rear preamp outputs are set to "non-fading", there will be no audio from that output in the dual zone mode.
- Security Code: You may program the unit with a 4-digit security code. Once the unit has been programmed with a security code, the code must be entered to use the unit after it has been disconnected from power.
- Display Type: This unit has a high-resolution multi-color LCD with white LED backlighting, giving you a bright, easy-to-read display. The display contrast is adjustable for best visibility. If the dimmer wire (orange/white) is connected to the vehicle dimmer circuit, the display will automatically dim when the vehicle's lights are turned on. The dimmer function can also be switched off if display dimming is not desired.
- Source Tone Memory: This feature allows you to store bass, middle and treble tone settings for each source (CD, FM, AM and Changer).
- Attenuator With Smooth Volume Return: This unit's attenuator button allows you to quickly lower the volume by a preset level with the press of a button. When the attenuator button is pressed again, the Smooth Volume Return feature gradually increases the volume to the original level, eliminating the jarring change in volume.
- Volume Offset Control: The level of each source may be independently adjusted to prevent radical leaps in output volume when switching from one source to another. The available settings range from -8 to 0.
- CR-2 Advanced Tuner: This unit uses Kenwood's CR-2 Advanced tuner for clear radio reception. You can choose one of three tuning modes: Auto 1 (seek tuning), Auto 2 (cycles through and tunes the selected band's preset stations only with each button press), or Manual.
- Clean Reception System Circuit (CRSC): This circuit controls multi-path distortion by reducing stereo separation. As stereo separation is reduced, multi-path has less effect on the radio signal, improving reception in areas with tall buildings and mountains. You can turn on/off this feature in the menu.
- Direct Access Tuning: When in the Tuner mode, you can directly access a station on the presently tuned band by pressing the Direct button on the remote control and entering the frequency on the remote's number pad.
- Station Name Preset (SNPS): This feature allows you to assign names to radio stations. Up to 32 FM stations and 16 AM stations can be named. Each name can be up to 8 characters in length.
- CD Naming: The DNPS (Disc Name Preset) feature can be used to enter names, up to 12 characters long, into memory for up to 30 discs. When a CD changer with disc naming memory is connected, names may be entered for CDs in the changer. The number of names that may be entered for discs in a changer depends on the changer model.
- Last Position Memory: If the unit is shut off or switched to the tuner mode while a CD is playing, the next time CD is selected as the source, playback will resume from the point where it left off.
- Disabled System Indicator: A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. This feature can be turned On or Off.
- Remote Control: The KDC-4022 comes with the RC-505 wireless remote control, a 22-button full-function remote with a 10-key number pad. It is powered by 2 "AA" batteries (supplied). The dimensions of the remote are: L=5.488", W=1.75", D=1.115".
- Optional Accessories: This unit is compatible with the following Kenwood accessories:
- Weather Band Tuner: for tuning in weather band stations (113WB100)
- Heads Up Display: flip up display for mounting on dash or visor (113HD100)
- Compass: connects to Heads Up Display--8 or 16 point compass (113CP100)
- Sensor Unit: connects to Heads Up display--Temperature and voltage sensor (113SS100)
- Changer Controls
- Compatibility: This unit is directly compatible with Kenwood changers manufactured in 1998 or later. If the changer has an O-N switch, the switch will need to be set to the "N" position. If you have a Kenwood changer manufactured before 1998, you will need the KCA-S210A switching adapter. Changers manufactured before 1994 require the CA-DS100 converter cord and the KCA-S210A switching adapter.
- Changer Controls: In addition to basic disc navigation features, this unit has the following changer controls: direct disc access (using the remote), direct track access (using the remote), track intro scan, track repeat, disc repeat, disc random, and all disc random.
- Disc Name Preset (DNPS): When used with a compatible CD changer, this feature allows you to assign names to discs in the changer. Each name can be up to 8 characters in length. The number of names you can store depends on the CD changer that is connected to the head unit.
- Disc Name Preset Play (DNPP): Once a disc has been named, you may press the DNPP button on the remote to display the name of each disc for 5 seconds. When the name of the desired disc appears, you can press the OK button on the remote to select the disc for playback.
- CD Text/MD Display: When connected to a CD Text capable CD changer or an MD changer, this unit can display disc and track titles for discs encoded with disc and track title information. The text information can be scrolled manually or automatically.
- Music Keg Compatible: The KDC-4022 is fully compatible with the Kenwood Music Keg Digital Music System (models KHD-C710 and KHD-CX910).
- Note
- Display Illumination/Clock Display: When the unit is in Standby mode, the face/button illumination is "keyed". In addition, while the unit is in Standby mode, the Clock Display can be turned on or off using the DISP button. When the Clock Display is turned on and the unit is in Standby mode, the Clock Display is also "keyed". Pressing and holding the source button turns the unit off completely.
|
|
|
 |
|
 |
|
|
|
